20% OFF shipping at musee-alpinisme.com on orders over $79 + up to 10% OFF products
musee-alpinisme.com
home > Fyne Audio F500S LCR Loudspeaker > Fyne Audio F500S LCR Loudspeaker
download picture
Fyne Audio F500S LCR LoudspeakerFyne Audio F500S LCR Loudspeaker The F500S LCR is a wall mountable loudspeaker from Fyne Audio's S Series designed to function as a left, centre, or right channel speaker in a home cinema system built around the F500S, F501S, or F502S. It uses a 150mm IsoFlare point source driver with a 25mm magnesium dome compression tweeter the same IsoFlare driver format as the F500S standmount in a compact horizontal enclosure with an Auxiliary Bass Radiator (ABR)
Shopping security

Shopping security

Each payment you make on thelockerguy is secured with strict SSL encryption and PCI DSS data protection protocols

Fyne Audio F500S LCR Loudspeaker

The F500S LCR is a wall-mountable loudspeaker from Fyne Audio's S Series — designed to function as a left, centre, or right channel speaker in a home cinema system built around the F500S, F501S, or F502S. It uses a 150mm IsoFlare point-source driver with a 25mm magnesium dome compression tweeter — the same IsoFlare driver format as the F500S standmount — in a compact horizontal enclosure with an Auxiliary Bass Radiator (ABR) for bass loading. Available in Black Oak, Natural Walnut, and Piano Gloss Black, it is the matched centre channel for the S Series front speakers and sold as a single unit.

The LCR designation means it is engineered to work in all three front channel positions — not only the centre. Running three F500S LCR units across the front of a cinema system gives a completely matched IsoFlare front stage: the same driver technology, the same crossover frequencies, the same magnesium dome tweeter in all three positions. The ABR bass loading avoids the placement constraints of a rear-ported design, making close-to-wall and on-stand installation equally practical.

IsoFlare Driver Technology

The IsoFlare driver combines the bass/midrange cone and the high-frequency compression tweeter on a shared axis — the tweeter fires from the centre of the bass/midrange cone — so both drivers radiate sound from the same point in space. In a centre channel, where listeners are spread across a wide angle relative to the speaker, point-source behaviour is particularly valuable — the frequency response stays consistent off-axis in a way that a conventional arrangement with a physically separated tweeter cannot.

In the F500S LCR, the IsoFlare driver is a 150mm multi-fibre cone unit with a 25mm magnesium dome compression tweeter. A second 150mm bass driver and a 150mm ABR complete the driver complement. The magnesium dome tweeter matches the F500S standmount, which is why the two speakers are tonally consistent when used together.

Auxiliary Bass Radiator

An Auxiliary Bass Radiator (ABR) is a passive radiating cone — it has no voice coil or magnet, but is tuned to move in sympathy with the bass pressure inside the cabinet. It extends low-frequency output without a port tube. In a wall-mounted or rack-mounted installation, this eliminates the need to keep a port opening clear of surfaces — the ABR's behaviour is determined by its tuning, not by the speaker's proximity to walls or equipment.

Practical Installation

The F500S LCR is designed for flexible installation. It can be wall-mounted in the left and right positions and placed freestanding for the centre position. The compact dimensions — 200 × 530 × 152mm — make it suitable for a wide range of installation environments, and the three finish options match the F500S, F501S, and F502S front speakers throughout.

Technical Specifications

System type 2.5-way with Auxiliary Bass Radiator (ABR)
IsoFlare driver 150mm point-source, multi-fibre cone, 25mm magnesium dome compression tweeter
Bass driver 150mm multi-fibre cone
ABR 150mm multi-fibre cone
Crossover frequencies 250Hz & 1.7kHz
Crossover type 2nd order low-pass / 1st order high-pass
Frequency response 56Hz – 34kHz (−6dB typical in room)
Sensitivity 90dB (2.83V @ 1m)
Nominal impedance
Recommended amplifier power 30–150W RMS
Continuous power handling 75W RMS
Dimensions (H × W × D) 200 × 530 × 152mm (7.9 × 20.9 × 6.0")
Finishes Black Oak; Natural Walnut; Piano Gloss Black

Who Is It For?

The F500S LCR is for the buyer building a cinema system around the F500S, F501S, or F502S who wants a properly matched centre channel using the same IsoFlare driver format and the same magnesium dome tweeter as the front speakers. The ABR loading and compact dimensions make it practical for a wide range of installation positions. The three finish options allow a consistent aesthetic across the front stage.

Those building at a higher level should consider the F57SP-6 — the SP Series centre channel with adjustable ABR damping and Cryo-Lite crossover treatment — or the F57SP-8 for the most capable Fyne Audio centre channel available. The Fyne Audio SuperTrax super tweeter is a natural complement to any S Series cinema system for extended HF performance.

Buying from Martins Hi-Fi

Martins Hi-Fi has been in Norwich since 1968. Elizabeth Gould runs the business today, and we stock only brands we have heard properly and stand behind. Dave and Chris can advise on cinema system configuration, installation options, and how many F500S LCR units are right for your setup.

Contact us at [email protected], call 01603 627010, or WhatsApp on 07554 687137. You can read more about how we work on our Why Martins Hi-Fi page. We are at 85–91 Ber Street, Norwich, NR1 3EY.

Fyne Audio F500S LCR Loudspeaker

Item no : 6168559052
sold recently : Login >>
US$ 249.50
Pay in 4 interest-free payments of $62.38 Learn more
Min. order: 1piece

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jun 21 - Jun 26

Enjoy 20% off shipping

US$ 249.50

1-11

US$ 224.55

12-35

US$ 174.65

36-59

US$ 149.70

60+

US$40

Get now

Sign up to your membership to get coupons up to

15%

Get now

Opportunity to enjoy order discount up to 15% off

Please add the products
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

recommand products

Related Searches